Ingenierías y Tecnologías

55 Items

Ingeniería Civil (arquitectura, ciencias de la construcción, ingeniería, ingeniería municipal y estructural)
Ingeniería eléctrica, electrónica (ingeniería eléctrica, electrónica, ingeniería de sistemas, ingeniería de comunicaciones, ingeniería de computadoras (hardware))
Otras ciencias de la ingeniería (de productos químicos, aeronáutica, mecánica, metalúrgica y materiales; productos forestales; ciencias aplicadas tales como geodesia, ingeniería industrial, etc.; producción de alimentos; tecnologías especializadas de los campos interdisciplinarios, e.g. análisis de sistemas, metalurgia, explotación minera, tecnología del textil)

All Items

  • Geomorphological characterization of the Mezcalapa river sub-basin, Grijalva-Usumacinta hydrological region (RH-30) in southeastern Mexico

    DOI: https://doi.org/10.33064/iycuaa2020803002
    Abner Álvarez-Soberano, Ojilve Ramón Medrano-Pérez
    32-44

  • Higro-thermal plasticized of Quercus scytophylla wood

    DOI: https://doi.org/10.33064/iycuaa2013593983
    Joel Benancio Olguín Cerón, Javier Ramón Sotomayor Castellanos
    25-33

  • Hydrographical characteristic of basins of Bahia de Navidad, Jalisco, Mexico

    DOI: https://doi.org/10.33064/iycuaa2019772120
    José Mariscal-Romero, Tunuary Roberto Chávez-González, Judith Arciniega-Flores
    38-46

  • Hydroxyapatite and selenium: Emerging players in the fight against cancer

    DOI: https://doi.org/10.33064/iycuaa2024914268
    Susana López-Ortiz, Daniela Salado-Leza

  • Inclusion of flour and oil of moringa seed as replacers and stabilizers fat on meat batter

    DOI: https://doi.org/10.33064/iycuaa2021843318
    Yazmin Margarita Muñoz-Guevara, Sugey Ramona Sinagawa-García, Jesús Alberto Lara-Reyes, Alejandro Isabel Luna-Maldonado, Zayd Eliud Rangel-Nava, Gerardo Mendez-Zamora

  • Index of urban coastal resilience for the management of urban solid waste

    DOI: https://doi.org/10.33064/iycuaa2021842808
    María Luisa Hernández-Aguilar, Randy Mauricio Martínez-Torres, Gerardo Daniel López-Montejo

  • Lumber recovery factor in two private sawmills in El Salto, Durango, Mexico

    DOI: https://doi.org/10.33064/iycuaa2012554050
    Juan Abel Nájera Luna, Gleen Hamilton Adame Villanueva, Jorge Méndez González, Benedicto Vargas Larreta, Francisco Cruz Cobos, Francisco Javier Hernández, Cristóbal Gerardo Aguirre Calderón
    11-23

  • Map of isosists of the maximum seismic accelerations of the ground, caused by the earthquake that occurred on September 7, 2021 in the state of Guerrero

    DOI: https://doi.org/10.33064/iycuaa2023904195
    Ricardo Flores-Martínez, Roberto Arroyo-Matus, Rocío Nayelly Ramos-Bernal

  • Mechanical characterization by stress waves of Quercus scytophylla plasticized wood

    DOI: https://doi.org/10.33064/iycuaa2014613653
    Javier Ramón Sotomayor Castellanos, Joel Benancio Olguín Cerón
    33-40

  • Microplastics: Presence and discemination in the environment

    DOI: https://doi.org/10.33064/iycuaa2023884100
    Anayansi Zaragoza-Estrada, Anayansi Estrada-Monje, Erasto Armando Zaragoza-Contreras

  • Models of taper and merchantable volume for Pinus oocarpa and Pinus douglasiana in the region of Pueblo Nuevo, Durango

    DOI: https://doi.org/10.33064/iycuaa2015643595
    Juana Constanza López Martínez, Francisco Cruz Cobos, Juan Abel Nájera Luna, Francisco Javier Hernández
    47-53

  • Non-Saccharomyces yeast importance during fermentation of alcoholic beverages

    DOI: https://doi.org/10.33064/iycuaa2015653585
    Aarón Casas Acevedo, Cristóbal Noé Aguilar González, Heliodoro De la Garza Toledo, Jesús Antonio Morlett Chávez, Didier Montet, Raúl Rodríguez Herrera
    73-79

  • Numerical simulation of the groundwater in the Guadalupe aquifer, Ensenada, Baja California, Mexico: Case study in steady- and transient-state conditions

    DOI: https://doi.org/10.33064/iycuaa2018751769
    Alejandro Figueroa-Núñez, José Rubén Campos-Gaytán
    46-54

  • Obtaining personalized biomodels of trabecular bone with and without porosity to its mechanical analysis and comparative results

    DOI: https://doi.org/10.33064/iycuaa2024924410
    Arturo Sánchez-Cervantes, Guillermo Urriolagoitia-Sosa, Beatriz Romero-Ángeles, Daniel Maya-Anaya, Jesús Manuel Germán-Carcaño, Guillermo Manuel Urriolagoitia-Calderón

  • Optimization of a coil-type heat exchanger using a genetic algorithm

    DOI: https://doi.org/10.33064/iycuaa2024924752
    Ricardo Del Castillo-Tinajero, Esperanza Rodríguez-Morales, José Julián III Montes-Rodríguez

  • Protection analysis for cyclist helmet under virtual impact by finite element method

    DOI: https://doi.org/10.33064/iycuaa2017701827
    Eddie Nahúm Armendáriz Mireles, José Adalberto Castillo Robles, Marco Antonio López Gutiérrez, Enrique Rocha Rangel
    44-49

  • Quantification and characterization of residues from the sawmill process in a pallet factory of El Salto, Durango, Mexico

    DOI: https://doi.org/10.33064/iycuaa2022863599
    Javier Ezequiel Medrano-Guerrero , Pedro Meza-López, Francisco Javier Hernández, Juan Abel Nájera-Luna

  • Recovering the Green function by means of seismic noise

    DOI: https://doi.org/10.33064/iycuaa201873206
    Francisco José Sánchez Sesma, Manuel Carbajal Romero, José Efraín Rodríguez Sánchez, Rafael Ávila Carrera, Alejandro Rodríguez Castellanos
    49-57

  • Rory V. O’Connor. In memoriam

    DOI: https://doi.org/10.33064/iycuaa2020803010
    Manuel Mora
    99-101

  • Stand volume estimation using Landsat 8 OLI satellite images in mixed temperate forests

    DOI: https://doi.org/10.33064/iycuaa2020813224
    Pedro García-Ramírez, Pedro Antonio Domínguez-Calleros, José Javier Corral-Rivas, Marín Pompa-García, Jorge Armando Chávez-Simental, Pablito Marcelo López-Serrano, Rodrigo Rodríguez- Laguna, Jaime Roberto Padilla-Martínez
    40-49

  • Study of thermal fluency of recycled PET using the thermoforming process

    DOI: https://doi.org/10.33064/iycuaa2014613652
    Carlos Sánchez López, Carlos Humberto Saucedo Zárate, Mario Salvador Esparza González, Luis Antonio Castañeda Ramos
    26-32

  • Surface improvement of AISI 316L steel using amorphous titanium nitride deposits by cathodic erosion technique

    DOI: https://doi.org/10.33064/iycuaa2021843133
    Jorge Bertín Santaella-González, Ricardo Orozco-Cruz, Julián Hernández-Torres , Leandro García-González

  • Sweet sorghum genotypes potentials for bioethanol production in the Mexicali Valley

    DOI: https://doi.org/10.33064/iycuaa2011524591
    Jorge Iván Alvarado-Padilla, Benjamín Hernández-Vázquez, Antonio Morales-Maza, Eva Ávila-Casilla, Sergio Payán-Ochoa, Mario Camarillo-Pulido
    15-20

  • Taper-volume compatible functions for three Pinus species at Management Forest Unit 0808 from Chihuahua state

    DOI: https://doi.org/10.33064/iycuaa201873207
    Edgar Silva González, Marco Antonio Nava Moreno, Francisco Javier Hernández, José Guadalupe Colín
    58-67

  • Techno-pedagogical perspective of augmented reality in education

    DOI: https://doi.org/10.33064/iycuaa2023904252
    Francisco Aguilar-Acevedo, Jesús Alberto Flores-Cruz, Daniel Pacheco-Bautista, Javier Caldera-Miguel
26-50 of 55